GILLIG 82-3294-0 Front Rear Brake Cam Bushing Pack

( Brand: Gillig ), ( Manufacturer Part Number: 82-3294-0 ), ( Type: Bushing ), ( Color: Black ), ( Material: Plastic )

Review GILLIG Oem Front And Rear Brake S cam Bushing Pack Of Ships Free

The **Gillig 82-3294-0 Front Rear Brake S-Cam Bushing Pack** is a precision-engineered replacement component designed to restore optimal performance and longevity to the brake system of Gillig low-floor and conventional buses, particularly those equipped with S-cam drum brakes. This high-quality bushing pack consists of a meticulously matched set of bushings, including the primary S-cam pivot bushings and the associated guide bushings, which are critical for smooth and reliable brake operation. Crafted from durable, wear-resistant materials, these bushings are engineered to minimize friction, reduce noise, and prevent premature wear on the brake mechanism, ensuring consistent braking power and extending the service life of the entire brake assembly. The bushings are designed to fit seamlessly into the brake housing, providing a snug yet flexible seal that accommodates the natural movement of the S-cam while maintaining structural integrity under heavy loads. Whether used in transit buses, school buses, or commercial shuttle fleets, this bushing pack helps mitigate the harsh conditions of daily operation, such as frequent stops, heavy braking, and exposure to varying temperatures, which can otherwise lead to brake failure or inefficient performance. By replacing worn or damaged bushings with this OEM-quality pack, fleet operators can enhance safety, reduce maintenance downtime, and lower long-term repair costs, all while adhering to strict industry standards for brake reliability. Ideal for both routine maintenance and emergency replacements, the **Gillig 82-3294-0** bushing pack is a straightforward yet essential upgrade for any professional seeking to maintain peak braking efficiency in their Gillig vehicle.

**Pros and Cons of buying a Gillig 82-3294-0 Front/Rear Brake S-Cam Bushing Pack**

The Gillig 82-3294-0 brake s-cam bushing pack is a well-regarded replacement part for Gillig low-floor buses, particularly those with S-cam drum brake systems. Here are the key advantages:

1. **Compatibility and Fit:** This part is specifically designed for Gillig low-floor models, ensuring a precise fit without modification. It replaces worn bushings in the brake S-cam assembly, which are critical for smooth brake operation.

2. **Improved Brake Performance:** Worn bushings can cause excessive play, leading to uneven braking, squeaking, or reduced stopping power. Replacing them restores proper brake function, enhancing safety and reliability.

3. **Extended Brake Life:** By reducing friction and wear on other brake components (such as the S-cam and brake shoes), these bushings help prolong the lifespan of the entire brake system.

4. **Cost-Effective Maintenance:** Replacing bushings is a relatively low-cost repair compared to overhauling the entire brake assembly. It s often a preventive measure to avoid more expensive failures down the line.

5. **Easy Installation:** These bushings are designed for straightforward replacement, typically requiring only basic tools and minimal downtime. Many mechanics report that the job can be completed in a few hours with proper preparation.

6. **OEM Quality:** As an original equipment manufacturer (OEM) or high-quality aftermarket part, these bushings meet the same standards as Gillig s original components, ensuring durability and performance.

7. **Reduced Noise and Vibration:** Worn bushings can create rattling or clunking noises during braking. Replacing them often eliminates these issues, improving the ride quality of the bus.

---

1. **Limited Availability:** As a specialized part for older Gillig models, it may not be as widely stocked as more common brake components. Purchasing may require ordering from a bus-specific supplier or distributor, which could involve longer lead times.

2. **Price Sensitivity:** Depending on the market, these bushings may be priced higher than generic or universal brake bushings. However, the trade-off is often justified by their reliability and fit.

3. **Installation Skill Required:** While the installation is generally straightforward, improper handling (e.g., cross-threading, over-tightening, or misalignment) can damage the S-cam or other brake components. Bus mechanics with experience in drum brake systems are best suited for this job.

4. **Wear on Adjacent Parts:** If the brake system has been neglected for an extended period, replacing just the bushings may not fully resolve all issues. Other components like the S-cam, brake shoes, or wheel cylinders might also need attention, adding to the repair scope.

5. **Environmental Factors:** In harsh operating conditions (e.g., extreme heat, cold, or heavy loads), bushings may wear out more quickly. Regular inspections are recommended to catch wear before it leads to failures.

6. **Potential for Counterfeit Parts:** When purchasing from third-party sellers (especially online), there is a risk of receiving counterfeit or low-quality bushings that fail prematurely. Buying from authorized dealers or reputable suppliers mitigates this risk.

---

The Gillig 82-3294-0 front/rear brake s-cam bushing pack is a practical and cost-effective solution for maintaining or restoring brake performance in Gillig low-floor buses. Its OEM-quality design ensures compatibility and reliability, while its relatively simple installation makes it a manageable maintenance task. The primary benefits improved braking, reduced noise, and extended brake life outweigh the minor drawbacks, such as potential lead times or the need for careful installation.

However, the decision to purchase should be weighed against the broader health of the brake system. If the bus has other worn components (e.g., brake shoes, S-cam, or wheel cylinders), addressing those issues concurrently may be more economical in the long run. Additionally, sourcing the part from a trusted supplier is critical to avoid quality issues.

---

If you are experiencing symptoms of worn brake bushings such as squeaking, uneven braking, or visible play in the brake assembly replacing them with the Gillig 82-3294-0 pack is a **strongly recommended** preventive measure. Here s how to proceed:

1. **Verify Compatibility:** Double-check that this part number matches your specific Gillig model (e.g., Low Floor, LFG, or similar). Consult your bus s service manual or contact Gillig or a bus parts specialist if unsure.

2. **Source from a Reliable Supplier:** Purchase from an authorized Gillig dealer, a bus parts distributor (e.g., Bus Parts Plus, Bus Depot, or local fleet supply companies), or a trusted online retailer with positive reviews. Avoid unknown sellers to avoid counterfeit parts.

3. **Inspect the Brake System:** While replacing the bushings, take the opportunity to inspect the S-cam, brake shoes, wheel cylinders, and hardware for wear or damage. Replace any other components that show significant wear to avoid recurring issues.

4. **Follow Installation Guidelines:** Use the manufacturer s instructions or a reputable repair guide (e.g., from Bus & Truck Repair Manuals) to ensure proper installation. Pay attention to torque specifications and alignment to prevent damage.

5. **Test After Installation:** After replacing the bushings, perform a test drive to ensure the brakes operate smoothly without unusual noises or vibrations. Gradually increase speed and apply the brakes to confirm even stopping power.

6. **Schedule Regular Maintenance:** Brake bushings and components should be inspected during routine maintenance intervals (typically every 50,000 100,000 miles, depending on usage). Proactive replacement prevents unexpected failures and extends the life of the brake system.

**Final Verdict:** For Gillig bus operators dealing with brake bushing wear, the Gillig 82-3294-0 pack is a **highly recommended** and worthwhile investment. Its benefits in safety, performance, and cost savings far outweigh the minor challenges, provided it is installed correctly and sourced from a trusted provider.

Details:

New, Old Stock. PACK OF 4 SHIPS FREE. OEM GILLIG 82-3294-0 FRONT REAR BRAKE S-CAM BUSHING.

part #: 8232940 price

• $25.95

specifications pedalspadsaz:

• brand: Gillig
• mpn: 82-3294-0
• type: Bushing
• color: Black
• material: Plastic

seller pedalspadsaz:

• rating: 99.6%
• city: Bahama, North Carolina
• # reviews: 3439

payments pedalspadsaz:

• other
• wallet: Paypal
• credit card: Discover

offer pedalspadsaz:

• availability: In Stock
• started: February 25, 2026
• sold: 0
• quantity: 3
• options: Ship-to-home
• best offers: True

general pedalspadsaz:

• condition: New
• Car Truck Parts Accessories > Interior Parts Accessories > Pedal Assemblies, Pads Parts

returns pedalspadsaz:

• time: 30 Days
• policy: Returns Accepted
• paid by: Seller

shipping pedalspadsaz:

• carrier: USPS
• type: Fixed
• cost: $0.00
• transit: 3-7 Days
• class: Standard
• service: USPS Ground Advantage